Syna Epoxy 60 (ERLX4360)

Syna Epoxy 60 (ERLX4360) - Names and Identifiers

Name	1,4-Cyclohexanedimethanol bis(3,4-epoxycyclohexanecarboxylate)
Synonyms	Syna Epoxy 60 (ERLX4360) 1,4-Cyclohexanedimethanol bis(3,4-epoxycyclohexanecarboxylate) 1,4-Cyclohexanedimethanol bis(3,4-epoxycyclohexanecarboxylat... cyclohexane-1,4-diyldimethanediyl bis(7-oxabicyclo[4.1.0]heptane-3-carboxylate) Cyclohexane-1,4-diylbis(methylene) bis(7-oxabicyclo[4.1.0]heptane-3-carboxylate) 7-oxabicyclo[4.1.0]heptane-3-carboxylic acid, 1,4-cyclohexanediylbis(methylene) ester 7-Oxabicyclo[4.1.0]heptane-3-carboxylic acid, 3,3'-[1,4-cyclohexanediylbis(methylene)] ester
CAS	20249-12-1
InChI	InChI=1/C22H32O6/c23-21(15-5-7-17-19(9-15)27-17)25-11-13-1-2-14(4-3-13)12-26-22(24)16-6-8-18-20(10-16)28-18/h13-20H,1-12H2

Syna Epoxy 60 (ERLX4360) - Physico-chemical Properties

Molecular Formula	C22H32O6
Molar Mass	392.49
Density	1.203
Boling Point	504.3±35.0 °C(Predicted)
Flash Point	218.5°C
Vapor Presure	2.7E-10mmHg at 25°C
Storage Condition	RT, dry
Refractive Index	1.526

Syna Epoxy 60 (ERLX4360) - Introduction

The common name for 1,4-cyclo hexanemethanol bis(3, phenyl) is propylene oxide alkyd with the chemical formula C12H18O6. The following is a description of its nature, use, preparation and safety information:

Nature:
-Appearance: Colorless or light yellow liquid.
-solubility: can be dissolved in alcohol, ether, Ester and other organic solvents; Poor solubility in water.
-Melting point: About -67 ° C.
-Boiling point: About 290 ° C.
-Relative density: about 1.11.

Use:
-Propylene oxide alkyd is a commonly used epoxy resin intermediate. It can be used as a monomer of epoxy resin to prepare epoxy resin in various application fields through polymerization reaction.
-Epoxy resin is widely used in adhesives, coatings, composite materials, electronic packaging and other fields. As the raw material of epoxy resin, propylene oxide alkyd Ester has good adhesion, chemical resistance and mechanical properties, and can be used in these fields.

Method:
Propylene oxide alkyd esters are generally prepared by the following steps:
1. First, 1,4-cyclohexanedimethanol and 3,4-epoxycyclohexanecarboxylic acid are subjected to an esterification reaction to obtain propylene oxide alkyd.
2. Then, the product with higher purity is obtained by purification and advanced treatment.

Safety Information:
-Propylene oxide alkyd ester can cause irritation and allergic reactions, and has an irritating effect on the eyes, skin and respiratory tract. Use appropriate protective measures, such as goggles, gloves and face masks.
-Prolonged and heavy exposure may be hazardous to health and it is considered a possible carcinogen. Therefore, it must be used and stored in strict accordance with safe operating procedures.
-During operation, Sparks, open flames or electrostatic discharge should be avoided to prevent fire or explosion.
-If you come into contact with skin or eyes, rinse immediately with water and seek medical attention.

Please note that when using any chemical substances, it is important to follow correct operating procedures and safety guidelines to ensure workplace and personal safety.

Last Update：2024-04-10 22:29:15